明升体育在线

Column classification

contact us

Qingdao Hanguang packaging equipment Co., Ltd

Contact person: Manager Niu

Tel: 0532-85663905 / 13805323576

Email: qingdaohangang@163.com

Address: No.44, Harbin Road, Sifang District, Qingdao, Shandong Province

Online consultation

Maintenance and troubleshooting of sealing and cutting machine

Using the machine, we not only need to carry out maintenance, but also when there is a fault, but also to deal with it. In any situation, we need to know how to solve it automatically Sealing and cutting machine It's the same, then Sealing and cutting machine What is the operation method of maintenance and troubleshooting?
?
1. After daily work, the blade must be cleaned and maintained with wire brush and film remover, and the moving parts must be lubricated regularly. ?
?
2. The contact surface of the blade, i.e. silicone strip, should be well protected. If it is found that the outer layer of high-temperature paint cloth is burnt, it should be replaced immediately.  
?
3. To replace the sealing cutter blade, loosen the fixed chuck that compresses the sealing cutter, take out the sealing cutter, clean the knife slot (pay attention not to damage the cutter slot, and use a section of the old blade replaced as the cleaning tool), install a new blade, place it in the slot and press it tightly, fix the two ends of the blade in the fixed chuck of the blade, compress the spring and fix the screw.  
?
 Sealing and cutting machine
If the sealing machine can not cut the film well, the following reasons may be caused:
?
There is no voltage at both ends of the sealing blade (the sealing transformer is damaged or the connection circuit is open, re connect or replace it)
The power supply voltage is too low (configure the input power supply for voltage stabilization)
?
Improper adjustment of sealing time or damage of time relay (readjustment or replacement)
?
The cutting surface of the blade is not smooth (clean the slot and re install the blade)
?
Broken blade or poor contact (adjust or replace blade)