明升体育在线

contact us

Qingdao Hanguang Packaging Equipment Co., Ltd.

Contact: Manager Niu

Phone: 0532-85663905 / 13805323576

Email: qingdaohanguang@163.com

Address: No.44 Harbin Road, Sifang District, Qingdao, Shandong Province

Online consultation
Position: Home > News > Industry News >

Do you know the operation and debugging of the sealing and cutting machine?

Today's heat shrink packaging machines have been widely used in all walks of life, but everyone will have some feelings when using this equipment. Among them is the newly purchased seal cutting shrink packaging machine when using packaging products It will not be debugged, and then the shrinkage effect will not meet the requirements. This problem is also very annoying. So what are the operation and commissioning of the shrink-shrink packaging machine? 封切机 小编就为大家解决这个烦恼,为大家支支招吧! Today , Xiaobian Xiaobian will solve this problem for everyone, for everyone to help!
The adjustment operation of the sealing and cutting shrink packaging machine. When we receive the heat shrink packaging machine from the manufacturer, we must first understand the basic operation of the equipment and all its functions. These instructions will be included in the instructions. Better control it. Because the sealing, cutting and shrinking packaging machine is not the same as some other equipment, all aspects must be in place to shrink the product. Select the film from the film and adjust the speed of film feeding.
According to the size of the product, it is very important to play a few rows of exhaust holes, adjust the height of the cutter, and the sealing time. It is indispensable. Generally, POF film is used to shrink the envelope. POF film shrinkage It ’s better. In terms of vent holes, because the phone box is not large, it is sufficient to punch a row of vent holes. It is not good to play more. As for adjusting the cutter height and sealing time, it is generally 1 to 1 times higher than the product. 2 cm is fine. After the product enters the shrinking furnace, observe the shrinkage of the film, and then slowly adjust it according to the actual situation. If the shrinkage is not complete, slow down the rotation speed. If the film is not completely expanded, increase the wind speed or increase the temperature appropriately.